ProCom 10,000 BTU Ventless Natural Gas Blue Flame Heater with Base Feet, Manual Control

The natural gas version of ProCom’s compact blue flame heater, for rooms, sunrooms and workshops up to 500 sq. ft. that already have a natural gas line. It lights with a push button, needs no electricity and can be wall-mounted or set on its base feet.

Highlights

• Up to 10,000 BTU, heats up to 500 sq. ft.
• Two heat settings: Low and High
• Push-button piezo ignition; no electricity required
• Oxygen depletion sensor (ODS) with automatic shut-off
• 99.9% efficient vent-free design
• Wall bracket and base feet included
• CSA certified

Specifications

• Brand: ProCom Heating
• Series: Blue Flame MA
• Output: 10,000 BTU
• Fuel: Natural gas only
• Heating area: Up to 500 sq. ft.
• Altitude: Not for use above 4,500 ft
• Warranty: 1-year limited

What’s in the box

• Heater, wall bracket and base feet
• Optional blower (PF06-YJLF-B) sold separately

Installation and service must be done by a qualified installer, service agency or your gas supplier.

Not available in California, Alaska or Hawaii. Vent-free gas heaters are restricted by state law in some areas, and we cannot ship this heater to those states. Check your local building and fire codes before installing.

Safety: Vent-free heaters must be installed and used according to the manufacturer’s manual. Use only the fuel the heater is set up for, keep the area around it clear, and never use it in a bathroom or bedroom unless the manual allows it. A working carbon monoxide detector is strongly recommended.

Ships free to eligible addresses in the contiguous United States.